The 875 is a 3/4" NPT diaphragm operated solenoid valve available as standard 2-way normally closed. Designed for a maximum recommended flow rate of 20 gallons per minute. The 875 is available with standard EDPM seals and optional Viton rubber seals for chemical applications.
Note: The solenoids are available in all listed voltages and types.
Materials
Seals
Nitrile (Standard), EPDM, Viton
Internal Components
Stainless Steel (300 and 400 series)
Valve Body Material
Noryl GTX-830 body and elastomer type
Port Size
3/4″ NPT female
Operating Temperature
to 180°F (82°C)
Electrical
Voltages Available
AC 50/60 Hz 24, 120 or 240 volts DC 12, or 24 volts
The 875 is a 3/4" NPT diaphragm operated solenoid valve available as standard 2-way normally closed. Designed for a maximum recommended flow rate of 20 gallons per minute. The 875 is available with standard EDPM seals and optional Viton rubber seals for chemical applications.
Note: The solenoids are available in all listed voltages and types.
Materials
Seals
Nitrile (Standard), EPDM, Viton
Internal Components
Stainless Steel (300 and 400 series)
Valve Body Material
Noryl GTX-830 body and elastomer type
Port Size
3/4″ NPT female
Operating Temperature
to 180°F (82°C)
Electrical
Voltages Available
AC 50/60 Hz 24, 120 or 240 volts DC 12, or 24 volts
Power Consumption
AC-5 watts, DC-6 watts
Coil Construction
Class A (105°C)
CA Prop. 65 WarningWARNING: This product may expose you to chemicals known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
WAQ770 Aquagation RO System Solenoid Valve - 2-Way Normally Closed - Class H DIN Connection - Strain Relief Connector - EPDM Seals - 240V - 3/4-Inch FPT x 3/4-Inch FPT
WAQ771 Aquagation RO System Solenoid Valve - 2-Way Normally Closed - Class H DIN Connection - Strain Relief Connector - EPDM Seals - 240V - 3/4-Inch FPT x 3/4-Inch FPT - 3 Meter Wired Cord