Aquagation Solenoid Valves with Manual Override
Currently, there are no documents available for this product.
-
WAQ100 Aquagation Reinforced Nylon Solenoid Valve w/ Manual Override - 24VAC - 26 GPM Max - 3/4-Inch (20/Cs) -
WAQ101 Aquagation Reinforced Nylon Solenoid Valve w/ Manual Override - 24VAC - 44 GPM Max - 1-Inch (20/Cs) -
WAQ102 Aquagation Reinforced Nylon Solenoid Valve w/ Manual Override - 24VAC - 110 GPM Max - 1-1/2-Inch -
WAQ103 Aquagation Reinforced Nylon Solenoid Valve w/ Manual Override - 24VAC - 176 GPM Max - 2-Inch (6/Cs) -
WAQ111 Aquagation 3-Way Valve w/ Manual Overide - Non-Latching Solenoid - Brass - Normally Closed - 24 VAC - 1/8-Inch
Details
Aquagation Solenoid Valves are 24VAC electric valves specifically designed for zone irrigation systems. These controller operated valves use water pressure and low voltage power to reliably cycle through plant feedings and deploy hourly, daily, and/or weekly crop steering irrigaiton techniques.
- 2 wire
- 24VAC power required
- Corrosion free materials, durable and long lasting
- Operates at a wide range of flow rates
- Manual override opening
- Adjustible flow control
Function: 2-Way, normally closed
Sizes: 3/4-Inch, 1-Inch, 1-1/2-Inch, 2-Inch
Pressure range: 0.3 to 10 bar
Temperature range: Fluid 5 Deg C to 50 Deg C (No freezing)
Manual override: Plastic (Reinforced nylon)
Solenoid operator: Stainless steel AISI 300 & 400 series
Seals: NBR
Spring: Stainless steel AISI 300 series
Voltage: AC (DC and latch available upon request)
WAQ111 is another valve option with its own specifications. The above does not apply.
- 3-Way, normally closed or normally open
- Port size: 1/4-Inch
- Bottom orifice: 6.0mm or 8.0mm
- Top orifice: 3.0mm or 5.0mm
- Main valve: Brass or stainless steel AISI 316
- Solenoid operator: Stainless steel AISI 300 & 400 series
- Seals: FKM, EPDM, FFKM
- Media: Air, water