Lida Plant Research Microline - Micronutrients Liquid Blend - 2.5 Gallons

Microline is a micronutrient-based liquid formulation with high stability, intended to prevent and correct micronutrient deficiencies that may interfere with plant development. It is designed for consistent application at the recommended dose rate throughout the crop cycle. Due to its high stability, Microline is indicated for any type of water used in hydroponic cultivation and any type of soil; it does not require acidification of the nutrient water tank and does not cause precipitation when mixed with other fertilizers. The product has a density of 10.68 lb/gal (1.28 kg/L) at 68°F, a relative density of 1.21 to 1.23, and a pH of 6 to 6.5 at 0.2% dilution. It is available in 2.5 gallon (9.46 liter) containers.

Chemical Composition and Formulation

Derived from boric acid, copper sulfate pentahydrate, iron (II) sulfate heptahydrate, manganese sulfate monohydrate, and zinc sulfate heptahydrate.

Hazard Classification
The product is classified as Eye Dam. 1 (H318: Causes serious eye damage) and Aquatic Chronic 2 (H411: Toxic to aquatic life with long lasting effects). Signal word: Danger. Contains copper sulfate pentahydrate and zinc sulfate heptahydrate. EUH statement: Restricted to professional users.

Functional Mechanism

Micronutrient deficiencies are common in high-yielding crops, particularly in alkaline or calcareous soils where iron, manganese, zinc, and copper become unavailable due to high pH. Boron deficiency causes poor fruit set, cracking, and hollow stem. Iron deficiency appears as interveinal chlorosis on young leaves. Manganese deficiency produces similar symptoms with distinct yellowing patterns. Zinc deficiency results in stunted growth and small, malformed leaves. Copper deficiency causes dieback and poor pigmentation. Microline provides these five essential micronutrients in a single, stable liquid formulation. The product's high stability means the chelated or complexed micronutrients remain in solution across a wide pH range, preventing precipitation when mixed with other fertilizers in the tank or in hydroponic nutrient solutions. This eliminates the need for acid injection to lower pH, which is otherwise required with many micronutrient blends to maintain solubility.

Target Applications and Rates

Vegetables (pepper, tomato, melons, cucumber, squash, pumpkin, green beans, green peas, onion, garlic, potato, sweet potato, carrot, beets, cabbage, cauliflower, broccoli, brussel sprouts, radish, leafy greens including lettuce, celery, cilantro, parsley, chards, spinach, asparagus, artichoke)

• Foliar rate: 5 to 12 fl oz per acre

• Use lower rates if spray volume is less than 30 gal/acre; higher rates if volume exceeds 60 gal/acre

• Terrestrial application concentration: 1 to 2 fl oz per 10 gallons water

• Fertigation rate: 1.5 to 2.5 pints per acre (drip or overhead sprinkler)

• Hydroponic rate: 3 to 8 fl oz per 1,000 gallons water

Strawberry, Blackberry, Raspberry, Blueberry

• Foliar rate: 6 to 16 fl oz per acre

• Use lower rates if spray volume is less than 40 gal/acre; higher rates if volume exceeds 100 gal/acre

• Terrestrial application concentration: 1 to 2 fl oz per 10 gallons water

• Fertigation rate: 1.5 to 2.5 pints per acre (drip or overhead sprinkler)

• Hydroponic rate: 3 to 8 fl oz per 1,000 gallons water

Grapes (Wine & Table)

• Foliar rate: 10 to 20 fl oz per acre

• Use lower rates if spray volume is less than 50 gal/acre; higher rates if volume exceeds 125 gal/acre

• Terrestrial application concentration: 1 to 2 fl oz per 10 gallons water

• Fertigation rate: 2 to 3 pints per acre. Use low to medium rate with drip systems; medium to high rate with any sprinkler system.

Fruit and Nut Trees (orange, lemon, lime, mandarin and hybrids, grapefruit, apple, stone fruits including peach, apricot, plum, cherry; nuts including almond, walnut, pecan, pistachio; avocado, fig)

• Foliar rate: 12 to 24 fl oz per acre

• Use lower rates if spray volume is less than 70 gal/acre; higher rates if volume exceeds 125 gal/acre

• Terrestrial application concentration: 1 to 2 fl oz per 10 gallons water

• Fertigation rate: 2 to 3 pints per acre. Use low to medium rate with drip systems; medium to high rate with any sprinkler system.

Row Crops (corn, sorghum, wheat, barley, dry beans, soy beans, cotton)

• Foliar rate: 4 to 8 fl oz per acre

• Terrestrial application concentration: 1.5 to 2 fl oz per 10 gallons water

• Aircraft applications: use low to medium rate

• Fertigation rate: 1 to 2 pints per acre. Can be applied with any pressurized irrigation system.

Forage Crops (alfalfa, hay grasses)

• Foliar rate: 5 to 12 fl oz per acre

• Terrestrial application concentration: 1.5 to 2 fl oz per 10 gallons water

• Aircraft applications: use low to medium rate

• Fertigation rate: 1 to 2 pints per acre. Can be applied with any pressurized irrigation system.

Nurseries & Landscape (ornamental, trees, turf, sod)

• Foliar rate: 5 to 12 fl oz per acre

• Use lower rates if spray volume is less than 30 gal/acre; higher rates if volume exceeds 50 gal/acre

• Terrestrial application concentration: 2 to 3 fl oz per 10 gallons water

• Fertigation rate: 0.5 to 1.0 fl oz per 1,000 square feet (drip or overhead sprinkler)

• Hydroponic rate: 3 to 8 fl oz per 1,000 gallons water

Use Restrictions and Warnings
The use of this fertilizer material on any crops other than those recommended may result in serious injury to the crops. Use only when necessary. Do not exceed the recommended rate. The user is responsible for any damages caused by lack of efficacy, toxicity, or residues due to failure to follow label instructions. Keep out of reach of children. Keep away from food, drinks, and cattle feed.

Storage and Handling
Avoid low temperatures in winter and temperatures above 82°F (28°C). Avoid direct sunlight and long storage periods. Store between 5°C and 35°C (41°F to 95°F) in a dry, well-ventilated place. Keep away from oxidizing agents and highly acidic or alkaline materials. Keep away from sources of heat, radiation, and electricity. Avoid contact with food. Once opened, containers must be carefully closed and placed vertically to prevent spills. Never use pressure to empty containers; they are not pressure-resistant.

Safety and Personal Protective Equipment
The product is classified as dangerous. Signal word: Danger. Hazard statements: H318 (Causes serious eye damage), H411 (Toxic to aquatic life with long lasting effects). Precautionary statements: P273 (Avoid release to the environment), P280 (Wear protective gloves/protective clothing/eye protection/face protection), P305+P351+P338 (IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do; continue rinsing), P310 (Immediately call a POISON CENTER/doctor), P391 (Collect spillage), P501 (Dispose of contents/container appropriately).

Personal Protective Equipment:

• Breathing protection: Filter mask (A2 type for organic gases and vapors) or as needed based on exposure assessment

• Hand protection: Chemical-resistant gloves (PVC, 0.35 mm thickness, >480 minute breakthrough time)

• Eye protection: Protective goggles with built-in frame

• Skin protection: Protective clothing and work footwear

First Aid Measures

• Inhalation: Move victim to open air; keep warm and calm. If breathing is irregular or stops, perform artificial respiration.

• Eye contact: Wash eyes with plenty of clean, cool water for at least 10 minutes while holding eyelids open. Do not let the person rub the affected eye. Seek medical assistance.

• Skin contact: Remove contaminated clothing. Wash skin vigorously with water and soap or a suitable skin cleaner. Never use solvents or thinners.

• Ingestion: If accidentally ingested, seek immediate medical attention. Keep calm. Never induce vomiting. If the person vomits, clear the respiratory tract. Cover the affected area with a dry sterile bandage. Protect the affected area from pressure or friction.

Corrosive product: contact with eyes or skin can cause burns; ingestion or inhalation can cause internal damage. Contact with eyes may cause irreversible damage. Repeated or prolonged contact may cause the removal of natural oils from the skin, leading to non-allergic contact dermatitis and absorption through the skin. In case of doubt or when symptoms persist, get medical attention. Never administer anything orally to unconscious persons. Request immediate medical attention.

Environmental Precautions
Product is dangerous for the environment. In case of large spills or if the product contaminates lakes, rivers, or sewers, inform responsible authorities according to local legislation. Prevent contamination of drains, surface water, groundwater, and soil. Contain and collect spills with non-combustible absorbent materials (earth, sand, vermiculite, diatomite). Clean area immediately with a suitable decontaminant. Do not dump into sewers or waterways. Dispose of waste according to local and national regulations.

Firefighting Measures
The product does not present any particular risk in case of fire. Suitable extinguishing media include powder, CO₂, alcohol-resistant foam, and water spray. Do not use a direct stream of water. In the presence of electrical voltage, do not use water or foam. Fire can produce thick, black smoke; thermal decomposition may form carbon monoxide and carbon dioxide. Use water to cool containers close to heat source or fire. Product residues and extinguishing media may contaminate the aquatic environment. Use protective suits against heat, individual breathing equipment, gloves, protective goggles or facemasks, and boots according to fire size.

Transport Information

• UN Number: UN3082

• UN proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (contains manganese(2+) hydrate sulfate / zinc sulfate heptahydrate / copper sulfate pentahydrate)

• Transport hazard class: 9

• Packing group: III

• Marine pollutant: Yes

• Labels: 9

• ADR LQ: 5 L

• IMDG LQ: 5 L

• ICAO LQ: 30 kg B

Compliance
Information regarding the contents and levels of metals in this product is available at http://www.aapfco.org/metals.html. The product is not affected by the SEVESO III Directive (2012/18/EU).