Lida Plant Research Algabiol - High Performance Organic Stimulant - OMRI Listed - 2.5 Gallons

Algabiol is a liquid seaweed extract derived from Ascophyllum nodosum, using potassium hydroxide as the extractant agent. It contains 12% organic matter and 3% soluble potash (K₂O). The product is designed for use at any crop stage to prevent damage from adverse environmental factors, overcome existing stress, enhance growth and development under suboptimal conditions, and strengthen overall plant health. It is OMRI certified for organic agriculture and is suitable for both organic and conventional crops. The product has a pH of 8 to 8.5 at 0.2% dilution and an absolute density of 1.11 kg/m³. It is not classified as hazardous under Regulation (EC) No 1272/2008 and can be applied alone or mixed with any plant protection product, biological, or fertilizer.

Chemical Composition and Formulation

• Organic matter: 12%

• Soluble potash (K₂O): 3%

Derived from Ascophyllum nodosum seaweed extracted with potassium hydroxide.

Functional Mechanism

Ascophyllum nodosum contains a suite of bioactive compounds including alginic acid, mannitol, laminarin, and cytokinins, auxins, and gibberellins. These compounds act as biostimulants rather than direct nutrients. Alginic acid functions as a soil conditioner, binding soil particles into stable aggregates and improving water-holding capacity. Laminarin triggers plant defense responses, priming the plant's immune system against fungal pathogens. Mannitol acts as an osmoprotectant, helping plant cells maintain turgor under drought or salinity stress. The naturally occurring cytokinins promote cell division and delay senescence, while auxins support root development. The 3% soluble potash provides a modest potassium supplement, but the primary value of the product lies in the hormonal and stress-mitigating effects of the seaweed extract itself.

Target Applications and Performance

Algabiol may be used on all crop types. Specific crop groups and rates:

Vegetables (pepper, tomato, melons, cucumber, squash, pumpkin, green beans, green peas, onion, garlic, potato, sweet potato, carrot, beets, cabbage, cauliflower, broccoli, brussel sprouts, radish, pak choi, bok choi, pe-tsai, other brassicas, leafy greens including lettuce, celery, cilantro, parsley, chards, spinach, asparagus, artichoke)

• Foliar rate: 12 to 24 fl oz per acre

• Use lower rates if spray volume is less than 30 gal/acre; higher rates if volume exceeds 60 gal/acre

• Terrestrial application concentration: 2.5 to 4 fl oz per 10 gallons water

• Aircraft applications: use low to medium rate

• Fertigation rate: 2 to 3 pints per acre. Can be applied with any pressurized irrigation system. For overhead sprinkler irrigation, use lower rate.

Strawberry, Blackberry, Raspberry, Blueberry

• Foliar rate: 12 to 32 fl oz per acre

• Use lower rates if spray volume is less than 40 gal/acre; higher rates if volume exceeds 100 gal/acre

• Terrestrial application concentration: 2.5 to 4 fl oz per 10 gallons water

• Aircraft applications: use low to medium rate

• Fertigation rate: 2 to 3 pints per acre. For overhead sprinkler irrigation, use lower rate.

Grapes (Wine & Table)

• Foliar rate: 12 to 28 fl oz per acre

• Use lower rates if spray volume is less than 50 gal/acre; higher rates if volume exceeds 100 gal/acre

• Terrestrial application concentration: 2 to 2.5 fl oz per 10 gallons water

• Fertigation rate: 2 to 3 pints per acre. Use low to medium rate with drip systems; medium to high rate with any sprinkler system.

Fruit and Nut Trees (orange, lemon, lime, mandarin and hybrids, grapefruit, apple, stone fruits including peach, apricot, plum, cherry; nuts including almond, walnut, pecan, pistachio; avocado, fig)

• Foliar rate: 20 to 40 fl oz per acre

• Use lower rates if spray volume is less than 70 gal/acre; higher rates if volume exceeds 125 gal/acre

• Terrestrial application concentration: 2.5 to 4 fl oz per 10 gallons water

• Aircraft applications: use low to medium rate

• Fertigation rate: 2 to 4 pints per acre. Use low to medium rate with drip systems; medium to high rate with any sprinkler system.

Row Crops (corn, sorghum, wheat, barley, dry beans, soy beans, cotton)

• Foliar rate: 8 to 16 fl oz per acre

• Terrestrial application concentration: 3 to 5 fl oz per 10 gallons water

• Aircraft applications: use low to medium rate

• Fertigation rate: 1 to 2 pints per acre. Can be applied with any pressurized irrigation system.

Forage Crops (alfalfa, hay grasses)

• Foliar rate: 8 to 20 fl oz per acre

• Terrestrial application concentration: 3 to 5 fl oz per 10 gallons water

• Aircraft applications: use low to medium rate

• Fertigation rate: 2 to 4 pints per acre. Can be applied with any pressurized irrigation system.

Nurseries & Landscape (ornamental, trees, turf, sod)

• Foliar rate: 10 to 20 fl oz per acre

• Use lower rates if spray volume is less than 30 gal/acre; higher rates if volume exceeds 50 gal/acre

• Terrestrial application concentration: 2.5 to 4 fl oz per 10 gallons water

• Fertigation rate: 1 to 2 fl oz per 1,000 square feet. Use low to medium rate with drip or overhead sprinkler systems; medium to high rate with other sprinkler systems.

Hydroponic Crops

• Fertigation rate: 24 to 72 fl oz per 100 gallons of water

• Substrate application: 4 to 8 fl oz per 1,000 gallons of substrate

• Area application: 1 to 2 fl oz per 1,000 square feet

Use Restrictions and Warnings
Use only when required. Do not exceed the recommended rate. The user is responsible for any damages caused by lack of efficacy, toxicity, or residues due to failure to follow label instructions. Keep out of reach of children. Keep away from food, drinks, and cattle feed.

Storage and Handling
Avoid low temperatures in winter and temperatures above 28°C (82°F). Avoid direct light and long storage periods. Store between 5°C and 35°C (41°F to 95°F) in a dry, well-ventilated place. Keep away from oxidizing agents and highly acidic or alkaline materials. Keep away from sources of heat, radiation, and electricity. Avoid contact with food. Once opened, containers must be carefully closed and placed vertically to prevent spills. Never use pressure to empty containers; they are not pressure-resistant.

Safety and First Aid
The product is not classified as hazardous. No individual protection equipment is required when the product is handled correctly, though work footwear is recommended. In the application area, smoking, eating, and drinking must be prohibited.

• Inhalation: If breathing stops, seek emergency medical attention. Move victim to open air; keep warm and calm. If breathing is irregular or stops, perform artificial respiration.

• Eye contact: Remove contact lenses if present. Wash eyes with plenty of clean, cool water for at least 10 minutes while holding eyelids open. Seek medical assistance.

• Skin contact: Remove contaminated clothing.

• Ingestion: Keep calm. Never induce vomiting.

No known acute or delayed effects from exposure to the product. In case of doubt or when symptoms persist, get medical attention. Never administer anything orally to unconscious persons.

Environmental Precautions
Do not allow product to enter sewers or waterways. Prevent penetration into the ground. Contain and collect spills with inert absorbent material (earth, sand, vermiculite, diatomite). Clean area immediately with a suitable decontaminant. Dispose of waste according to local and national regulations.

Firefighting Measures
Suitable extinguishing media include powder, CO₂, alcohol-resistant foam, and water spray. Do not use a direct stream of water. In the presence of electrical voltage, do not use water or foam. Exposure to combustion or decomposition products can be harmful to health. Use water to cool containers close to a heat source or fire. Use protective suits against heat, individual breathing equipment, gloves, protective goggles or facemasks, and boots according to fire size.

Compliance
The product is OMRI certified for organic agriculture. Information regarding the contents and levels of metals is available at http://www.aapfco.org/metals.html. The product is not affected by the SEVESO III Directive (2012/18/EU).