Fluence RAPTR 2 LED Lighting & SHYFT Control System
About this product
The Fluence RAPTR 2 Series is a high-output, broadband LED top light for commercial horticulture, configured here with the Fluence SHYFT Light Scheduler and the connection and mounting accessories required to install and control the system. The RAPTR 2 is engineered as a 1:1 replacement for high-pressure sodium (HPS) fixtures and for supplemental greenhouse and high-intensity indoor lighting. This configuration covers the RAPTR 2 fixture (277-400V), the SHYFT controller, the Wireless Flex Dimming adapter for SHYFT, the AC power cord, and the Unistrut wire hanger.
Definitions
- PPF (Photosynthetic Photon Flux) — the total photosynthetically active light a fixture emits per second, measured in micromoles per second (µmol/s) over 400-700 nm.
- PPE / Efficacy (Photon Efficacy) — photons delivered per unit of electrical energy, in micromoles per joule (µmol/J); higher values mean more light per watt.
- Photoperiod — the duration of the daily light cycle.
- Photoacclimation — gradual ramping of light intensity to let plants adapt without stress or photobleaching.
RAPTR 2 Fixture Specifications
| Parameter | Specification |
|---|---|
| Light source | LED |
| AC input voltage | 277-400 V AC, 50/60 Hz |
| Input power | 1050 W |
| Power factor | 0.98 |
| Photon output (PPF) | Up to 3,500 µmol/s |
| Efficacy | Up to 3.6 µmol/J |
| Spectrum options | PhysioSpec Broad R4, Broad R4a, and T48 Dynamic (tunable) |
| Optical distribution | 120 degrees Lambertian (clear cover) or 135 x 150 degrees Quad Beam |
| Thermal management | Passive (no fans) |
| Power supply | Integrated |
| Dimming | Wireless dimming, 10%-100% |
| Total harmonic distortion | Less than 10% |
| Maximum ambient temperature | 40 degrees C (104 degrees F) |
| Rated lifetime | Q90 50,000 hours (at 25 degrees C ambient) |
| Photobiological safety | IEC 62471 Risk Group 2 |
| Environmental rating | IP66, wet location |
| Certifications | cULus, CE; standards UL8800, IEC 60598-1, IEC 62471 |
| Warranty | 5-year limited |
Performance by Spectrum (at 277V AC, 400-800 nm)
| PhysioSpec Spectrum | AC Power | Output (PPF) | Efficacy |
|---|---|---|---|
| Broad R4 (BW4) | 1,050 W | 2,800 µmol/s | 2.7 µmol/J |
| Broad R4a (BW4a) | 1,050 W | 2,900 µmol/s | 2.8 µmol/J |
| T48 Dynamic | 1,050 W | 2,700-3,500 µmol/s | 2.6-3.6 µmol/J |
Fixture Dimensions
| Spectrum Build | Length | Width | Height | Weight |
|---|---|---|---|---|
| Broad R4 / T48 | 32.5 in (82.5 cm) | 14.3 in (36.4 cm) | 5.1 in (13 cm) | 37.5 lb (17 kg) |
| Broad R4a | 37.7 in | 14.3 in (36.4 cm) | 5.1 in (13 cm) | 33 lb (15 kg) |
SHYFT Light Scheduler
The SHYFT controller automates intensity and photoperiod across Fluence 0-10V LED fixtures. It provides two programmable channels for independent management of separate growth zones, with patented Photoacclimation and daily Photoperiod modes to control the scheduling, consistency, and quantity of light delivered at each growth stage. SHYFT is built to withstand a wide range of operating temperatures and humidity and can be mounted directly in the cultivation environment.
| Parameter | Specification |
|---|---|
| Programmable channels | 2 (independent zones) |
| Control modes | Photoacclimation, Photoperiod |
| Fixture control signal | 0-10 V (analog), compatible with Wireless Flex Dimming |
Wireless Flex Dimming Adapter for SHYFT
Replaces 0-10V dimming wiring with Bluetooth mesh control, enabling installation without dedicated control cabling.
| Parameter | Specification |
|---|---|
| Channels | 1 |
| Input signal | 0-10 V DC analog, linear |
| Light control | 0%-100% intensity, linear |
| Output signal | Bluetooth mesh (SILVAIR-enabled), 4 dBm max at 2.4 GHz |
| Maximum receivers per adapter | 300 fixtures per zone (versus 50 wired) |
| RF range | 50 ft (15.24 m) line-of-sight, up to 8 mesh hops |
| Configuration | iOS mobile app; suitable for wet locations; no batteries |
Connection and Mounting Accessories
- AC Cord — 277V pigtail by push-lock connector, 6-foot, for fixture power.
- VYPR Unistrut Wire Hanger — galvanized steel wire hanger for suspending fixtures from overhead Unistrut C-channel.
Applications
High-intensity indoor cultivation, 1:1 HPS replacement, and supplemental greenhouse lighting for commercial cannabis, produce, and floriculture, with centralized multi-zone dimming and scheduling.
Details
The Fluence RAPTR 2 Series is a high-output, broadband LED top light for commercial horticulture, configured here with the Fluence SHYFT Light Scheduler and the connection and mounting accessories required to install and control the system. The RAPTR 2 is engineered as a 1:1 replacement for high-pressure sodium (HPS) fixtures and for supplemental greenhouse and high-intensity indoor lighting. This configuration covers the RAPTR 2 fixture (277-400V), the SHYFT controller, the Wireless Flex Dimming adapter for SHYFT, the AC power cord, and the Unistrut wire hanger.
Definitions
- PPF (Photosynthetic Photon Flux) — the total photosynthetically active light a fixture emits per second, measured in micromoles per second (µmol/s) over 400-700 nm.
- PPE / Efficacy (Photon Efficacy) — photons delivered per unit of electrical energy, in micromoles per joule (µmol/J); higher values mean more light per watt.
- Photoperiod — the duration of the daily light cycle.
- Photoacclimation — gradual ramping of light intensity to let plants adapt without stress or photobleaching.
RAPTR 2 Fixture Specifications
| Parameter | Specification |
|---|---|
| Light source | LED |
| AC input voltage | 277-400 V AC, 50/60 Hz |
| Input power | 1050 W |
| Power factor | 0.98 |
| Photon output (PPF) | Up to 3,500 µmol/s |
| Efficacy | Up to 3.6 µmol/J |
| Spectrum options | PhysioSpec Broad R4, Broad R4a, and T48 Dynamic (tunable) |
| Optical distribution | 120 degrees Lambertian (clear cover) or 135 x 150 degrees Quad Beam |
| Thermal management | Passive (no fans) |
| Power supply | Integrated |
| Dimming | Wireless dimming, 10%-100% |
| Total harmonic distortion | Less than 10% |
| Maximum ambient temperature | 40 degrees C (104 degrees F) |
| Rated lifetime | Q90 50,000 hours (at 25 degrees C ambient) |
| Photobiological safety | IEC 62471 Risk Group 2 |
| Environmental rating | IP66, wet location |
| Certifications | cULus, CE; standards UL8800, IEC 60598-1, IEC 62471 |
| Warranty | 5-year limited |
Performance by Spectrum (at 277V AC, 400-800 nm)
| PhysioSpec Spectrum | AC Power | Output (PPF) | Efficacy |
|---|---|---|---|
| Broad R4 (BW4) | 1,050 W | 2,800 µmol/s | 2.7 µmol/J |
| Broad R4a (BW4a) | 1,050 W | 2,900 µmol/s | 2.8 µmol/J |
| T48 Dynamic | 1,050 W | 2,700-3,500 µmol/s | 2.6-3.6 µmol/J |
Fixture Dimensions
| Spectrum Build | Length | Width | Height | Weight |
|---|---|---|---|---|
| Broad R4 / T48 | 32.5 in (82.5 cm) | 14.3 in (36.4 cm) | 5.1 in (13 cm) | 37.5 lb (17 kg) |
| Broad R4a | 37.7 in | 14.3 in (36.4 cm) | 5.1 in (13 cm) | 33 lb (15 kg) |
SHYFT Light Scheduler
The SHYFT controller automates intensity and photoperiod across Fluence 0-10V LED fixtures. It provides two programmable channels for independent management of separate growth zones, with patented Photoacclimation and daily Photoperiod modes to control the scheduling, consistency, and quantity of light delivered at each growth stage. SHYFT is built to withstand a wide range of operating temperatures and humidity and can be mounted directly in the cultivation environment.
| Parameter | Specification |
|---|---|
| Programmable channels | 2 (independent zones) |
| Control modes | Photoacclimation, Photoperiod |
| Fixture control signal | 0-10 V (analog), compatible with Wireless Flex Dimming |
Wireless Flex Dimming Adapter for SHYFT
Replaces 0-10V dimming wiring with Bluetooth mesh control, enabling installation without dedicated control cabling.
| Parameter | Specification |
|---|---|
| Channels | 1 |
| Input signal | 0-10 V DC analog, linear |
| Light control | 0%-100% intensity, linear |
| Output signal | Bluetooth mesh (SILVAIR-enabled), 4 dBm max at 2.4 GHz |
| Maximum receivers per adapter | 300 fixtures per zone (versus 50 wired) |
| RF range | 50 ft (15.24 m) line-of-sight, up to 8 mesh hops |
| Configuration | iOS mobile app; suitable for wet locations; no batteries |
Connection and Mounting Accessories
- AC Cord — 277V pigtail by push-lock connector, 6-foot, for fixture power.
- VYPR Unistrut Wire Hanger — galvanized steel wire hanger for suspending fixtures from overhead Unistrut C-channel.
Applications
High-intensity indoor cultivation, 1:1 HPS replacement, and supplemental greenhouse lighting for commercial cannabis, produce, and floriculture, with centralized multi-zone dimming and scheduling.