Gripple Tensioning & Installation Tools

Tensioning and Pulling Tools
The Gripple Contractor Tensioning Tool is a heavy-duty mechanical device for applying significant tension on trellis wires, high-tensile fencing, and barbed wire. It utilizes a two-handed lever action to draw wire through Gripple joiners and features an adjustable stroke length for either speed or maximum force. The tool's load indicator shows the approximate tension applied in pounds, allowing for precise and consistent installations according to engineering specifications. The Torq Tensioning Tool provides a lightweight, ergonomic alternative, ideal for repetitive overhead work in vineyards and orchards. This compact tool operates with a one-handed ratcheting mechanism for efficient in-line pulling and features an integrated scale for monitoring tension loads. Both tools incorporate safety overload release mechanisms and require specific cam sets for different wire gauges; the Cam Set for Contractor Tool handles wires from 2.00 mm to 4.00 mm (13.5–8 GA), while the Cam Set for Torq Tool fits 1.40 mm to 2.50 mm (17–12.5 GA) wires.

Anchor and Post Driving Systems
The Gripple Gas-Powered Anchor/Post Driver system automates the installation of earth anchors and line posts for fencing and trellising. The core engine, the "BOSS" model, is a high-capacity driver that connects to a variety of steel drive rods. It utilizes controlled percussive force to drive anchors or posts into the ground without the need for pre-digging holes. The system employs interchangeable Adaptor Sleeves that interface between the driver and the drive rod; specific sleeves, such as the 1-inch or 3/4-inch models, are required for compatibility with either the BOSS 78 or Classic 52 driver heads. Steel Drive Rods, available in lengths of 4, 6, and 7 feet with diameters of 3/4 or 1 inch, transmit the driving force. The Strike Plate protects the top of the anchor during installation, while the JACKJAW Drive Rod Extractor is a specialized accessory for removing rods from the ground. The JACKJAW Loop Puller Accessory is used with the tensioning tools to create tight loops in wire for connecting to anchors.

Cutting, Repair, and Installation Accessories
A suite of professional-grade cutters ensures clean, precise wire preparation and maintenance. The HT Wire Cutter is engineered for cutting high-tensile steel wire. The Knipex Wire Cutter offers superior leverage for general wire cutting tasks. For larger cables, the Large Cable Cutter and Small Cable Cutter provide the necessary force for clean cuts on heavy-gauge materials.
Specialized tools address specific installation and repair challenges. The Anchor Reinforcement Setting Tool is used to install soil reinforcement plates on existing earth anchors to increase their holding capacity. The Twist Anchor Chuck is an accessory that attaches to a drive rod for installing screw-type earth anchors. The Fenox Anchor Install Tools are a set designed for the installation of specific Fenox brand anchor systems.

Professional Kits and Carrying Solutions
The Gripple GP Medium Tool Deal Kit combines the Torq Tensioning Tool with 250 GP Medium Gripple joiners, providing a complete package for a specific wire gauge range. The Gripple Starter Pack offers an entry-level configuration with the Torq Tool and 50 GP Medium joiners. For organization and efficiency on-site, the Gripple Workbelt is a heavy-duty tool belt designed to hold tensioning tools, Gripple joiners, cutters, and accessories, keeping essential equipment accessible during fence or trellis construction.

Key Tool Specifications and Applications